Vhodné pre bezdrôtový Bluetooth ovládač Nintendo Switch/LED/lite/PC s funkciou Turbo Vibration NFC

1. Connect Bluetooth to the switch host A. Press and hold for about 3 seconds, and flash channel lights 1-4 to Bluetooth matching mode. B. Open the switch console, click on the "Handle" icon on the console homepage, then click "Change Handle/", and wait for the handle to connect. C. After successful connection, you can directly press the main button to wake up the host and connect the handle back. 2. Connect to the switch host A. Select the settings, controllers, and sensors at the bottom of the switch console's main interface to ensure that the option status is normal; B. When the handle is opened, connect the handle and the host to the OTG conversion head and data cable; C. Led1 indicator flashing, handle successfully connected. After successful connection, unplug the data cable handle and it will connect independently. D. If a switch base is used for development, the handle base can be directly connected to the data cable. After successful connection, unplug the data cable handle and it will connect on its own. E. If the current connected handle is a P-2 handle, then Led1+Led2 is long and bright. Product Name: Switch Full Function Wireless Bluetooth Handle SW778 Compatible devices: Switch/switch lite/switch oled/PC Function: 1. NFC function 2. Turbo function 3. Vibration adjustment function 4. D-Input and X-Input functions 5. Six axes 6. With LED lights 7. Interface: TYPE-C interface Battery capacity: With a built-in 600mAh battery capacity, it only takes 2-3 hours to charge and can last for about 10 hours Product weight: 220g Product size: 170 * 110 * 40mm