DY29 CAN Tester 16Pin Splitter Box OBD2 Car Detector Fault Diagnosis Instrument

29 New Auto Car Breakout Box OBDII OBD Breakout Box Car Protocol Detector Car OBD2 Interface Car Monitor Free Shipping Product Description This is an automotive tool for the OBDII diagnostic link connector that offers easy access to the OBDII connector for monitoring protocol signals, power, and grounds conveniently and safelyIt can also be connected to a multimeter or oscilloscope for further testing once unconfirmed signals are detected FEATURES - Probing at the OBDII connector is no longer required - Easily access each of the 16 pins while the scan tool is communicating with the vehicle - LEDs quickly indicate power or ground problems of OBDII connector - Mimics the OBDII connector layout for quick reference - Quick, safe, and convenient access to chassis ground and power by this monitor - Use safety banana sockets that accept all types of 4mm banana plugs including those with safety sheaths LED INDICATIONS Yellow LED Pin 2/6/7/10/14/15 Light up to shov communication with scan tool and protocol Identification Green LED Battery 4/5 Light up to shov ground is hour Red LED Pin16 Light up to shov there is power PACKING LIST Manual*1 Host*1 CAUTIONS AND DISCLAIMER Bu araçlar için tasarlanmış bir araçtır -This tool provides easy access to the vehicle data bus lines Improper use of this tool can result in damage to the vehicle's data communication system and associated circuits and systems Do not jump pins together without understanding the circuits Do not use the tool to power up a device exceeding 1 amp Do not place a jumper between the power pin 16 and ground pins 4, 5. When this monitor is engaged, the yellow LEDs will flash when changes take place on the corresponding data line The flashing LEDs will allow you to determine the activity on that line The green and red LEDs corresponding to the OBDII connector pins 4, 5, and 16 are always active